简支及悬臂箱梁在角隅轴向荷载作用下的翼板纵向应力

基于能量变分原理，拟定轴向荷载作用下箱梁的纵向位移函数，得到关于翼板剪切变形引起的位移差函数的基本微分方程，继而推导出箱梁翼板纵向应力表达式，并首次得出角隅轴向荷载作用下翼板出现应力不均匀分布的荷载及边界条件。通过对一模型箱梁进行计算，并与通用有限元软件ANSYS壳单元计算结果进行比较，验证了该方法和所推导公式的正确性。研究结果表明，当作用于简支箱梁截面角隅处的轴向荷载（合力无偏心）为集中或分布荷载时，翼板不产生纵向应力不均匀现象；当作用于悬臂箱梁截面角隅处的轴向荷载（合力无偏心）为集中荷载时，翼板不产生纵向应力不均匀现象，而当荷载轴向分布时，翼板将产生纵向应力不均匀现象。实际工程中，横力弯曲使悬臂箱梁产生剪力滞效应，这种效应会与轴向分布荷载产生的效应叠加，设计时对此应予以充分考虑。     

Catalytic Kinetic Resolution of Biaryl Compounds

Biaryl compounds with axial chirality are very common in synthetic chemistry, especially in catalysis. Axially chiral biaryls are important due to their biological activities and extensive applications in asymmetric catalysis. Thus the development of efficient enantioselective methods for their synthesis has attracted considerable attention. This Minireview discusses the progress made in catalytic kinetic resolution of biaryl compounds and chronicles significant advances made recently in catalytic kinetic resolution of biaryl scaffolds.     

ZnO‐Coated Carbon Nanotubes: Inter‐Diffusion of Carboxyl Groups and Enhanced Photocurrent Generation

ZnO is a defect‐governed oxide and emits light at both visible and UV regimes. This work employs atomic layer deposition to produce oxide particles on oxygenated carbon nanotubes, and the composites only show emission profiles at short wavelengths. The quenching of defect‐related emissions at long wavelengths is verified, owing to carboxyl diffusion into oxygen vacancies, and doping is supported by ZnCO₃ formation in oxide lattice. Fully coated tubes display an increased photocurrent and the quantum efficiency increases by 22 % relative to the bare nanotubes.     

混凝土轴拉加卸载随机损伤模型的建立与试验验证

为了分析及深入探讨混凝土在受拉加载及卸载情况下的力学特性,基于随机损伤本构关系提出了一种混凝土轴拉加卸载模型,推导出了混凝土加卸载的应力 应变关系表达式.为了印证理论表达式,进行了混凝土轴向拉伸及加卸载的试验研究,测得了混凝土的材料参数及其相应的轴拉加卸载应力-应变曲线.结合模型的计算结果,对混凝土的轴拉加卸载试验结果进行了对比分析,结果表明:混凝土轴拉加卸载模型能够预测混凝土的极限强度,同时能描述混凝土的强度软化、加载过程中的弹模折减及卸载后的塑性变形.     

初始微观结构缺陷和断裂的温度依赖及相关性

纳米线(NW)结构内的微观结构缺陷对NW的机械性能存在一定的影响。NW断裂位置的预测关系着纳米器件应用的寿命,进而引起了人们的广泛关注。在本工作中,基于统计分析,分别研究了单晶铜纳米线(Cu NW)拉伸过程中出现的断裂位置以及在应力屈服点处产生的初始微观结构缺陷(初始缺陷)的位置对温度的依赖性,进一步探究了两者之间的联系。利用分子动力学(MD)模拟了单晶Cu NW在20~300 K的温度范围内的拉伸状态,共包含6个体系,各温度体系包含300个独立的样本。基于机器学习,采用density-based spatial clustering of applications with noise (DBSCAN)算法,将hexagonal close-packed (hcp)原子划分为各个初始缺陷以进一步确定其位置。统计结果显示,当温度低于50 K时,初始缺陷的位置集中在NW的两端。随着模拟温度的上升,MD模拟结果展现了单晶Cu NW的拉伸过程中的杨氏模量、平均屈服应力、平均势能等机械性能对温度的依赖性。温度的升高进一步促使了更多初始缺陷的产生,并使得初始缺陷的位置由统计分布的两端向中间平均化。与初始缺陷相比,各温度下的断裂位置集中在两端。统计结果表明,模拟的温度范围对NW的断裂位置无明显影响,但对初始缺陷的产生具有明显影响。当温度低于100 K时,初始缺陷的位置分布与断裂位置分布呈现了一致性。由于两者具有不同的温度依赖,其差异随着温度的上升逐渐显现。对不同温度下的微观结构形变行为观察发现,断裂失效明显受到NW两端的表面效应和阻挡效应的影响。最终的断裂位置受塑性形变中后期的影响,与应力屈服区产生的初始缺陷无直接联系。     

双功能改性的T型分子筛膜用于有机溶剂脱水

将3-氨丙基三乙氧基硅烷（APTES）引入到T型分子筛膜表面,用以修饰多晶膜合成过程中产生的缺陷。X射线衍射、场发射扫描电子显微镜、X射线光电子能谱和FT-IR等方法的表征结果显示,APTES通过“键合”的形式被成功地修饰到膜表面上。APTES层起到2个作用：一是提高膜的亲水性;二是减少膜层的缺陷。将修饰后的膜应用在348 K、90%的异丙醇水溶液的脱水时,该膜表现出比较高的分离因子和通量。该方法重复性良好,5个修饰后的膜样品的选择性平均增加了大约8倍（从359±23增加到2 934±183）,而渗透通量仅仅从（3.52±0.10） kg·m^-2·h^-1降低到（3.06±0.14） kg·m^-2·h^-1（减少13.07%）。在363 K下,修饰的膜经过100 h的连续测试,膜渗透测得的水含量均可达到99.50%以上,表明修饰后的膜性能较稳定。     

Computational Screening of 3 d Transition Metal Atoms Anchored on Defective Graphene for Efficient Electrocatalytic N2 Fixation

The synthesis of ammonia (NH₃) through the electrochemical reduction of molecular nitrogen (N₂) is a promising strategy for significantly reducing energy consumption compared to traditional industrial processes. Herein, we report the design of a series of monovacancy and divacancy defective graphenes decorated with single 3d transition metal atoms (TM@MVG and TM@DVG; TM=Sc−Zn) as electrocatalysts for the nitrogen-reduction reaction (NRR) aided by density functional theory (DFT) calculations. By comparing energies for N₂ adsorption as well as the free energies associated with *N₂ activation and *N₂H formation, we successfully identified V@MVG, with the lowest potential of −0.63 V, to be an effective catalytic substrate for the NRR in an enzymatic mechanism. Electronic properties, including Bader charges, charge density differences, partial densities of states, and crystal orbital Hamilton populations, are further analyzed in detail. We believe that these results help to explain recent observations in this field and provide guidance for the exploration of efficient electrocatalysts for the NRR.     

Noncovalent Axial I⋅⋅⋅Pt⋅⋅⋅I Interactions in Platinum(II) Complexes Strengthen in the Excited State

Coordination compounds of platinum(II) participate in various noncovalent axial interactions involving metal center. Weakly bound axial ligands can be electrophilic or nucleophilic; however, interactions with nucleophiles are compromised by electron density clashing. Consequently, simultaneous axial interaction of platinum(II) with two nucleophilic ligands is almost unprecedented. Herein, we report structural and computational study of a platinum(II) complex possessing such intramolecular noncovalent I⋅⋅⋅Pt⋅⋅⋅I interactions. Structural analysis indicates that the two iodine atoms approach the platinum(II) center in a “side-on” fashion and act as nucleophilic ligands. According to computational studies, the interactions are dispersive, weak and anti-cooperative in the ground electronic state, but strengthen substantially and become partially covalent and cooperative in the lowest excited state. Strengthening of I⋅⋅⋅Pt⋅⋅⋅I contacts in the excited state is also predicted for the sole previously reported complex with analogous axial interactions.